We offer brick slip tracking systems suitable for most construction methods including external wall insulation, solid wall insulation, SIPS and ICF. With a range of brick slip colours and finishes your project can really stand out from the crowd.
Cementone Mortar Plasticiser (5L)
Plasticiser for pointing mortar to aid flow when pointing mortar is applied using either a mortar gun or piping bag. This aids flow of pointing mortar when piped into the joint.
Mortar Pointing Gun
Mortar piping gun to make the task of pointing brick slips faster and easier
Pointing Mortar Piping Bag
Pointing mortar piping bags are the preffered cost effective means of pointing brick slip jobs and can improve the finish
Polyeurathane Brick Slip Tracking Sheet
Brick Slip Tracking System for use with ICF, timber frame etc. and large scale applications speed up and de-skill the project. A variety of fixings means this can be applied on top of many substrates. This tracking is only suitable for 65mm brick slips.
Polyeurathane Brick Slip Tracking Sheet 17mm XPS
Brick Slip Tracking System for use with ICF, timber frame etc. and large scale applications to speed up and de-skill the project. A variety of fixings means this can be applied on top of many substrates. This tracking is only suitable for 65mm brick slips.
Silane Epoxy Adhesive
Brick Slip Epoxy adhesive with a very high grab and high technical specification. This glue is a 600ml foil pack suitable for adhesion to virtually any surface and will cover approximately 1 M2. Usually this glue is used when you are using a tracking system or where there is large areas to cover and ease of use is key.
These 10mm T spacers are ideal for brick slip projects and can be mortared in once the adhesive has set. You can just use wood offcuts and the like but if you do not have the time or inclination to be trimming shims of wood then these are for you.